ES101 MIPI Long-Line Endoscope Camera Module
Product Videos
Downloads
ES101 MIPI Long-Line Endoscope Camera Module - Product Introduction

Product Overview
This long-line endoscope module uses the ES101 1/9-inch 1M CMOS image sensor (sensor purchased externally, module fully processed in-house) as its imaging core, developed for endoscopes and narrow-cavity exploration. The module supports single-lane MIPI CSI-2 output and can be matched with a UVC image-processing decoder board, with cable length customisable from 10 cm to 3 m and a probe outer diameter of 2.8-3.2 mm, balancing miniaturisation, HD imaging and long-distance signal transmission; full customisation is supported for medical endoscopes, industrial pipe inspection, equipment internal inspection, portable inspection devices and more.
Core Imaging Performance (based on the ES101 sensor)
High-definition micro imaging: 1000H x 1000V effective pixels, 1.4 um BSI back-illuminated pixels with strong light sensitivity and excellent low-light imaging; colour Bayer / mono modes supported, SNR 37.2 dB, dynamic range 72 dB, rich image layers and high detail reproduction.
High frame-rate output: up to 60 FPS in full-frame mode and 80 FPS in Boost mode; Skip, Binning and Window readout modes supported, with frame rates up to 300 fps at reduced resolution for smooth motion and reduced motion blur.
Flexible data formats: MIPI 1-Lane interface with RAW8 / RAW10-bit output and up to 10-bit quantisation, convenient for back-end ISP image algorithms; the chip uses a no-external-capacitor design, ideal for ultra-compact endoscope probe designs.
Low-power design: dynamic power-save mode and low standby leakage; 30 FPS consumes only 27 mW and 60 FPS 35 mW, keeping probe heat low for long continuous operation; electronic rolling shutter with flexibly configurable exposure, analogue gain and digital gain for complex lighting environments.
Product Features
✅ 1. Ultra-compact probe design
The probe outer diameter is customisable to 2.8-3.2 mm, small enough to enter narrow cavities and thin tubes; stainless steel or copper tube can be selected as the probe housing, with metal tube length made to order; the probe end face supports grinding and chamfering to reduce insertion snagging and improve safety and durability.
✅ 2. MIPI long-line custom solution with stable long-distance signal
The module completes cable manufacturing in-house; cable length is customisable from 10 cm to 3 m with customisable cable diameter; wiring and impedance matching are optimised for long-distance MIPI signals, keeping images stable over long lines and reducing attenuation, screen artefacts and packet loss, solving the pain point that ordinary short-distance MIPI modules cannot meet long routing; the module can be matched with a UVC image-processing decoder board, plug-and-play for rapid setup of a complete imaging system.
✅ 3. Full-spectrum hardware customisation to match customer solutions
Complete custom development is available per customer project requirements. Main customisable items:
Mechanical structure: probe outer diameter 2.8-3.2 mm, total cable length and cable diameter; probe housing material (steel / copper tube), metal tube length, probe tip grinding and chamfering;
Optics: lens FOV customisation to fit different viewing-field requirements;
Illumination: LED count and LED specification selection, with series / parallel LED circuit schemes;
Supporting system: adapts to the UVC image-processing decoder board; tail connector type and cable exit method can interface with the customer's existing main-control hardware platform.
✅ 4. Mature module manufacturing process, high reliability
Probe assembly, cable crimping, signal tuning and finished-product testing are all completed in-house; stress protection is applied for endoscope scenarios, cable bending performance is optimised and the probe is well protected; the sensor also supports mirroring, black-level correction and multiple readout modes, and can work with customer software for register tuning to complete device integration quickly.
✅ 5. Rich sensor functions, flexible software tuning
The ES101 sensor configures registers via I2C and supports exposure, analogue / digital gain, frame rate, windowing, Binning, Skip, image mirror flip and more; built-in shadow registers update parameters frame-synchronously, easing AE auto-exposure and AGAIN auto-gain algorithm development for different operating conditions.
Customisation and Integration
We provide module customisation services: the ES101 sensor is purchased externally and all module processing is done in-house. The module can be matched with a UVC image-processing decoder board. Customers may provide requirement parameters: probe outer diameter, total cable length, metal tube material and length, lens FOV, LED configuration, interface and more; we provide solution evaluation, sample prototyping through to volume delivery.
ES101 MIPI Long-Line Endoscope Camera Module
1. Core Imaging Sensor Specifications (ES101)
Sensor purchased externally; module assembled in-house | Item | Specification | | ---- | ---- | | Sensor model | ES101 (1/9" CMOS BSI) | | Effective resolution | 1000H x 1000V, 1 megapixel | | Pixel size | 1.4 um x 1.4 um BSI | | Sensing mode | Bayer colour / mono configurable | | Max frame rate | Full frame 60FPS; Boost mode 80FPS; crop mode up to 300FPS | | Output interface | 1-Lane MIPI CSI-2 | | Output data format | RAW8 / RAW10bit | | SNR | 37.2dB | | Dynamic range | 72dB | | Sensitivity | 0.92V/lux-s | | Shutter | Electronic rolling shutter | | Power | 27mW@30FPS; 35mW@60FPS | | Special hardware | No external capacitor design; dynamic power-save mode, low standby leakage | | Config interface | I2C, shadow registers for frame-synchronous parameter update | | Adjustable functions | Exposure time, analogue gain, digital gain, image mirror, Binning, Skip, window ROI, black-level correction |
2. Mechanical Structure Customisation Parameters
Table
| Item | Specification & Customisation Range |
|---|---|
| Probe outer diameter | 2.8 mm - 3.2 mm customisable |
| Total cable length | 10 cm - 3 m made to order |
| Cable diameter | Custom to customer-specified wire gauge |
| Probe housing material | Stainless steel tube / copper tube (choose one) |
| Rigid metal tube | Custom length; probe tip grinding and chamfering |
| Production model | Module fully processed, assembled and tested in-house; sensor purchased externally |
3. Optical & Illumination Customisation Parameters
Table
| Item | Customisation Content |
|---|---|
| Lens FOV | Customised to customer requirements |
| LED light source | LED count and specification customisable; LED series and parallel circuit schemes supported |
4. Hardware Integration Capabilities
Image output: MIPI 1-Lane output; can be matched with a UVC image-processing decoder board to rapidly set up a complete imaging system.
Tail connector: connector model and cable exit method can be customised to complete-device requirements.
Long-distance optimisation: the module performs MIPI impedance matching for long cables, reducing long-distance signal attenuation, screen artefacts and packet loss.
5. Core Product Functions
Multiple readout modes: full frame, Skip, Binning pixel combining and Window ROI; reduced resolution achieves higher frame rates and suppresses motion blur.
Image adjustment: horizontal / vertical mirror flip; built-in black-level correction eliminates temperature-induced black-level drift.
Exposure and gain: exposure time, analogue gain and digital gain independently configurable; AE auto-exposure and AGC auto-gain algorithm development supported.
Low-power operation: dynamic power-save mode, low standby leakage, low probe heat, suitable for long continuous operation.
Stable long-line transmission: 10 cm - 3 m cable adaptation with impedance-matching tuning for stable long-distance image output.
Flexible parameter updates: shadow registers take effect on the next frame without corrupting the current frame output.
6. Customisation and Delivery
The ES101 sensor is purchased externally; module processing and assembly, cable manufacturing and testing are all completed by us.
Customers provide: probe outer diameter, cable length, metal tube specification, FOV, LED requirements and board interfacing requirements; we provide solution evaluation, sample prototyping and volume supply.
※ Typical Applications

ES101 MIPI Long-Line Endoscope Camera Module | Application Showcase
1. Medical applications (human clinical)
Adaptable to a wide range of minimally invasive endoscopic devices across clinical departments:
Bronchoscope
ENT endoscope
Choledochoscope
Gastrointestinal endoscope
Uroscope
Pyeloscope
Arthroscope
Transforaminal endoscope
Neuroendoscope
Dental scope (oral endoscope)
Applicable departments:
Stomatology, orthopaedics, urology, respiratory medicine, neurology, gastroenterology, proctology, gynaecology, etc. Product forms: electronic rigid-tube endoscopes, electronic flexible-tube endoscopes and spring-tube endoscopes.
2. Veterinary medical applications
Small-animal veterinary endoscopes for animal oral, ear-canal, respiratory and body-cavity exploration; for pet hospitals and livestock veterinary equipment.
3. Industrial inspection applications
Small-bore pipe inspection, equipment internal-cavity inspection, precision equipment gap exploration, mould cavity inspection, aerospace / hydraulic pipeline endoscopic inspection, and narrow-cavity defect screening.
4. Product-form adaptation
This ES101 long-line endoscope module has a probe outer diameter of 2.8-3.2 mm, supports custom cable lengths of 10 cm to 3 m and can be matched with a UVC image decoder board, flexibly fitting different structural solutions:
Rigid-tube option: rigid probe with stainless steel / copper tube, suited to rigid-access scenarios such as arthroscopy, transforaminal, dental and ENT applications.
Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, urology, gastrointestinal and other scenarios requiring flexible access into cavities.
Service Advantages
- Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
- Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
- Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;
Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;
-
Full-chain technical service
Covering endoscope image processing from hardware to the application layer;
-
Cross-platform coverage
Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;