OCH02B10 Long-Line Endoscope Camera Module
Product Videos
Downloads
OCH02B10 Long-Line Endoscope Camera Module

Note: the OCH02B10 image sensor is a purchased component; the module structure, cable processing, probe assembly and testing are all completed in-house. The probe can be packaged into a 4.0 mm outer-diameter long-line module with deep customisation supported, and can be matched with a UVC image-processing decoder board to rapidly build a complete endoscopic imaging system.
High-performance CubeChip micro imaging solution with 2MP high-definition endoscopic imaging. It uses the OmniVision OCH02B10 CameraCubeChip chip-scale packaged sensor with PureCel Plus-S back-illuminated technology, a 1500 x 1500 square frame, full-frame 60 fps high frame-rate output and dual-exposure dynamic HDR; low-light imaging is excellent. With no redundant volume of a conventional lens holder, the probe end is highly integrated, fitting disposable and reusable endoscope device development.
AntLinx four-wire long-line transmission with stable long-distance imaging. The module uses the AntLinx FOURWIRE 4-wire interface at up to 1.6 Gbps; cable length is customisable from 10 cm to 4 m. We perform impedance matching and signal-integrity optimisation for long lines, solving the screen artefacts, packet loss and signal attenuation that conventional MIPI suffers over long distances. It can be matched with a UVC image-processing decoder board, interfacing with the back-end controller and capture cards for rapid complete-device integration.
Fully customisable 4.0 mm probe structure. The probe can be packaged to a 4.0 mm outer diameter, balancing imaging, LED illumination and internal routing space; probe housing options include stainless steel tube and copper tube, with rigid metal tube length made to order; the probe end face supports grinding and chamfering, reducing insertion snagging and improving safety. Cable diameter can be selected on demand, balancing flexibility and tensile strength, fitting flexible, rigid and spring-tube endoscope structures.
Optics and illumination customised on demand. The lens FOV is customisable with a native typical diagonal FOV of 130 deg +/- 7 deg; depth of field can be optimised for endoscopic scenes; LED count and specification are customisable with series and parallel circuit schemes supported; hardware PWM output directly drives LEDs for dynamic brightness adjustment, adapting to different lighting conditions inside cavities.
Rich on-chip ISP functions reduce back-end development effort. The sensor integrates automatic black-level calibration ABLC, dynamic defect-pixel correction DPC, white-balance gain, binning pixel combining, window cropping and mirror flip; SCCB register configuration, an internal temperature sensor and one-time-programmable OTP memory are built in; Group-hold multi-register frame-synchronous parameter updates ease AE/AGC auto-algorithm development and reduce back-end ISP workload.
Complete in-house production chain from samples to volume delivery. The sensor is purchased externally; probe assembly, cable crimping, soldering, signal tuning, burn-in and finished-product testing are all completed in-house; tail connector and cable exit method can be customised to the customer's complete-device structure; sample prototyping, solution evaluation and delivery from small batches to mass production are supported.
2. Functions and Parameters
1. Core Imaging Sensor Specifications (OCH02B10)
| Item | Specification |
|---|---|
| Sensor model | OCH02B10-RAUA (CameraCubeChip) |
| Optical format | 1/7.5", PureCel Plus-S back-illuminated BSI |
| Effective resolution | 1500 x 1500 (2 megapixels) |
| Pixel size | 1.116 um x 1.116 um |
| Max frame rate | Full frame 1500x1500: 60 fps; HDR mode 30 fps; binning / window cropping for higher frame rate |
| Output interface | AntLinx FOURWIRE 4-wire interface, up to 1.6 Gbps |
| Output format | 10-bit RGB RAW, multiple output sizes: 1500x1500 / 1280x720 / 960x540 / 640x480 |
| Shutter type | Electronic rolling shutter; Stagger HDR dual exposure |
| Control interface | SCCB serial control bus |
| Standby power | 650 uA |
| Operating junction temp | -20 C to +70 C; stable imaging range 0 C - 50 C |
| Built-in functions | ABLC automatic black-level calibration, DPC dynamic defect-pixel correction, white-balance gain, mirror / flip, binning, window cropping, on-chip PLL, internal temperature sensor, OTP memory, PWM/Strobe flash control, Group-hold frame-synchronous register update |
| Mating requirement | Must be used with the companion chip OAH0428; the chip itself is non-autoclavable |
2. Mechanical Structure Customisation Parameters
| Item | Specification & Customisation Range |
|---|---|
| Probe outer diameter | Packaged 4.0 mm (tolerance-controlled per structure) |
| Total cable length | 10 cm - 4 m made to order |
| Cable diameter | Custom to customer-specified wire gauge; flexible and tensile |
| Probe housing material | Stainless steel tube or copper tube (choose one) |
| Rigid tube section length | Custom; probe tip grinding and chamfering available |
| Production model | OCH02B10 sensor purchased externally; probe, cable, welding / assembly and complete-machine testing completed in-house |
3. Optical & Illumination Customisation Parameters
| Item | Customisation Content |
|---|---|
| Lens FOV | Customisable; native typical diagonal FOV 130 deg +/- 7 deg; focal length 0.763 mm, Fno 5.5 |
| LED light source | LED count and specification customisable; series / parallel circuits supported; hardware PWM output for dynamic brightness adjustment |
4. Hardware Integration Capabilities
Image output: AntLinx four-wire 1.6 Gbps output; can be matched with a UVC image-processing decoder board to rapidly set up a complete endoscopic imaging system.
Tail connector: connector model and cable exit method can be customised to the complete-device requirements.
Long-line optimisation: signal impedance matching tuned for long-distance cables reduces long-line transmission interference and ensures stable image output.
5. Core Product Functions
Multiple readout modes: full-frame output, binning pixel combining, horizontal / vertical subsampling and window ROI cropping; lower resolution raises frame rate and suppresses motion blur.
Image preprocessing: built-in automatic black-level calibration ABLC and dynamic defect-pixel DPC correction; manual white-balance gain supported; horizontal / vertical image mirror flip; colour-bar and rolling-bar test patterns for production-line debugging.
Exposure and gain control: long / short dual-channel HDR exposure; exposure time, analogue gain and digital gain configurable; Group-hold multi-register frame-synchronous updates take effect on the next frame, facilitating AE and AGC algorithm development.
Illumination hardware control: PWM / Strobe outputs support xenon and multiple LED flash modes and can directly drive probe LEDs for brightness control.
Temperature monitoring: an on-chip temperature sensor reads the die junction temperature, facilitating complete-device overheat protection.
Stable long-distance imaging: 10 cm - 4 m cable adaptation with impedance-matching tuning for stable long-line image output.
※ Typical Applications

Important: the manufacturer has not performed fail-safe validation for the OCH02B10 in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.
✅ Medical field
1. Human clinical endoscopes
Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), choledochoscopes, arthroscopes, transforaminal endoscopes, neuroendoscopes, dental scopes, hysteroscopes, proctoscopes, etc. Applicable departments: respiratory medicine, urology, orthopaedics, neurology, stomatology, gynaecology and proctology. Product-form fit: disposable and semi-reusable endoscope solutions; compatible with rigid, flexible and spring-tube endoscope structures.
2. Veterinary medical endoscopes
For small-animal clinics and livestock veterinary equipment; used for animal oral, ear, respiratory and body-cavity exploration; can serve as veterinary bronchoscope and uroscope imaging modules.
✅ Industrial inspection field
Internal inspection of small pipes, cavity inspection of precision equipment, defect detection in narrow gaps; mould cavity inspection; hydraulic and aerospace pipeline endoscopy; internal defect observation of components; special portable inspection equipment.
✅ Product-form adaptation
This OCH02B10 long-line endoscope module has a probe that can be packaged to a 4.0 mm outer diameter, a cable customisable from 10 cm to 4 m, and can be matched with a UVC image decoder board.
Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as arthroscopy, oral and ENT inspection.
Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into cavities.
✅ Product overview
The OCH02B10 long-line endoscope module is developed on a 2-megapixel CameraCubeChip micro imaging chip. The probe can be packaged to a 4.0 mm outer diameter and supports up to 4 m MIPI long-line transmission with staggered-HDR high-dynamic imaging; it fully covers human clinical endoscopy, veterinary endoscopy and precision industrial inspection, and supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, arthroscopes, oral scopes and other endoscopic devices.
✅ Customisation and integration
The OCH02B10 imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are completed in-house. Customers may provide parameters including probe outer diameter, total cable length, metal tube material and length, lens FOV, LED configuration and mating board requirements; we can provide solution evaluation, sample prototyping through to mass production supply.
Service Advantages
- Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
- Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
- Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;
Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;
-
Full-chain technical service
Covering endoscope image processing from hardware to the application layer;
-
Cross-platform coverage
Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;