★ National High-Tech Enterprise AI Imaging & Camera Module Customization
HomeProductsSolutionsApplications CustomizationTechnologyCustom CasesAboutContact

OV9734 Long-Line Endoscope Camera Module

Product Videos

Video coming soon

OV9734 Long-Line Endoscope Camera Module

UVC endoscope solution

Note: the OV9734 image sensor is a purchased component; the complete long-line probe, cable processing, probe assembly, tuning and finished-product testing are all completed in-house. The probe can be packaged into a 3.6-4.0 mm outer-diameter long-line module, and the cable can be made to order from 3 to 4 m. The lens is custom-replaceable, and the module can be matched with a UVC image-processing decoder board, supporting full-process custom development of mechanical structure, LED and connectors. Important: the sensor itself cannot be autoclaved and the manufacturer has not performed fail-safe validation for Class III life-critical medical devices. If used in human clinical equipment, the customer must complete device sterilisation, performance, safety and registration certification; we provide only the imaging camera module hardware.

1. Product Features

720P high-definition PureCel imaging with a 3.6-4.0 mm probe outer diameter and a custom-replaceable lens. It uses the OmniVision OV9734 CSP-packaged CMOS image sensor with a 1/9" optical format, PureCel pixel technology, 1280 x 720 (720P HD) effective resolution and a 1.4 um pixel size, delivering high image clarity and excellent colour reproduction. The probe can be packaged down to a 3.6-4.0 mm outer diameter, balancing insertion passage with imaging performance. The lens is custom-replaceable and its FOV, focal length and depth of field can be adjusted on demand to suit different endoscopic viewing conditions. It is suitable for disposable and semi-reusable endoscope product development.

1-Lane MIPI long-line transmission with signal-integrity optimisation for 3-4 m cables. The module uses a single-lane MIPI output and the cable can be made to order from 3 to 4 m. We perform impedance matching and signal-integrity tuning for long-distance MIPI differential signals, reducing attenuation, screen artefacts, packet loss and interference noise caused by long cables. The module can interface with a UVC image-processing decoder board for rapid conversion to USB digital image output, shortening the customer's complete-device development cycle.

Fully customisable mechanical structure

Probe housing options include stainless steel tube and copper tube; rigid tube section length is made to order; the probe end face supports grinding and chamfering, reducing insertion snagging and improving safety.

Total cable length is 3-4 m and cable diameter can be selected on demand; the tail connector model and cable exit method can be customised to the customer's complete-device structure.

Compatible with rigid, flexible and spring-tube endoscopes in multiple mechanical forms.

Optics and illumination customised on demand. The lens FOV, focal length and depth of field can be custom-replaced; the full LED light source can be customised, including LED count and specification, with series and parallel circuit schemes supported. It can work with the back-end controller for dynamic LED brightness adjustment, adapting to complex light and dark cavity environments.

Comprehensive on-chip ISP preprocessing reduces back-end development effort. The sensor integrates dynamic defect-pixel correction DPC and automatic black-level calibration ABLC; it supports 2x2 binning pixel combining, window ROI cropping and image mirror flip; Group-hold register-group frame-synchronous updates switch parameters seamlessly between frames with no image tearing; multiple built-in production-line test colour-bar patterns; SCCB serial bus configuration makes it easy for customers to tune AE auto-exposure and AGC auto-gain algorithms; software and hardware dual standby low-power modes suit battery-powered portable devices.

Complete in-house production and delivery system. The sensor is purchased externally; probe assembly, cable crimping and soldering, signal tuning, burn-in and finished-product testing are all completed in-house. We provide requirement evaluation, sample prototyping and delivery from small batches to mass production, and can support customers in SCCB register tuning for rapid complete-device integration.

 

1. Core Imaging Sensor Specifications (OV9734)

ItemSpecification
Sensor modelOV9734 PureCel colour CMOS CSP package
Optical format1/9", max CRA 32.1 deg
Active resolution1280 x 720 (720P)
Pixel size1.4 um x 1.4 um
Lens configurationCustom-replaceable lens; FOV, focal length and depth of field made to order
Frame rate1280x720@30fps; 640x480@45fps; 640x360 (binning)@60fps
Output interface1-Lane MIPI-TX, up to 480 Mbps per lane
Output data formatRAW8 / RAW10-bit
Power supplyAVDD analogue 2.8 V; DVDD core 1.2 V; DOVDD IO 1.8 V
Power consumptionActive 69 mW; hardware standby XSHUTDN 0.9 uW
Operating temperature-30 C to +85 C; stable image 0 C to 50 C
Control interfaceSCCB two-wire serial bus; FSIN frame-sync input; internal PLL, input clock 6-27 MHz
Core imaging functions2x2 RGB binning; window ROI crop; mirror / flip; DPC dynamic defect-pixel correction; ABLC automatic black-level calibration; multiple test colour bars; Group-hold frame-synchronous register update; software + hardware dual standby modes; horizontal / vertical subsampling
NotesChip non-autoclavable; do not sterilise by autoclave

2. Mechanical Structure Customisation Parameters

ItemSpecification & Customisation Range
Probe outer diameterPackaged down to 3.6-4.0 mm
Total cable length3-4 m made to order
Cable diameterCustom to customer-specified wire gauge
Probe housingStainless steel tube or copper tube (choose one)
Rigid tube lengthCustom; tip grinding and chamfering available
Tail connectorConnector model and cable exit customisable
Lens noteCustom-replaceable; FOV, focal length and depth of field adjustable
Production modelOV9734 sensor purchased externally; probe, cable, welding / assembly and all testing completed in-house

3. Optical & Illumination Customisation Parameters

ItemCustomisation Content
Lens FOVCustom-replaceable lens; FOV, focal length and depth of field adjusted on demand
LED light sourceLED count and specification customisable; series / parallel circuits supported; dynamic LED brightness adjustment

 

4. Hardware Integration Capabilities

Image output: 1-Lane MIPI output, can be matched with a UVC image-processing decoder board to rapidly set up a complete endoscopic imaging system.

Long-line optimisation: MIPI impedance matching tuned for 3-4 m cables reduces interference noise in long-line transmission and ensures stable image output.

Control interface: the SCCB interface reads and writes registers for exposure, gain and mode switching; FSIN frame sync is supported for multi-sensor synchronous capture.

5. Core Product Functions

Multi-resolution and multi-frame-rate readout: supports 720P full frame, VGA and binning reduced-resolution output; 2x2 binning pixel combining, window ROI cropping and horizontal / vertical subsampling; reduced-resolution modes raise frame rate and suppress motion blur, fitting different complete-device bandwidth schemes.

Built-in image preprocessing: DPC dynamic defect-pixel correction and ABLC automatic black-level calibration; horizontal / vertical mirror flip for endoscope assembly; multiple built-in colour test bars for production-line debugging and device verification.

Flexible exposure and gain configuration: exposure time, analogue gain and digital gain can be configured independently; Group-hold register groups apply frame-synchronous parameter updates with no image tearing, facilitating AE auto-exposure and AGC auto-gain algorithm development.

Multi-level power management: software standby mode (SCCB communication retained); hardware XSHUTDN standby as low as 0.9 uW, suited to battery-powered portable endoscopic devices.

Stable long-distance imaging: supports 3-4 m long cables with impedance matching tuning for stable MIPI long-line output; FSIN frame-sync input supports multi-sensor synchronous capture.

※ Typical Applications

UVC endoscope solution

Important: the manufacturer has not performed fail-safe validation for the OV9734 in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.

✅ Medical field

1. Human clinical endoscopes (for disposable and semi-reusable endoscopes)

Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), choledochoscopes, hysteroscopes, dental scopes and proctoscopes. Applicable departments: respiratory medicine, urology, ENT, stomatology, gynaecology and proctology. Product-form fit: supports disposable and semi-reusable endoscope solutions; compatible with rigid, flexible and spring-tube endoscope structures; the 3.6-4.0 mm probe outer diameter and 720P high-definition imaging balance cavity passage with image quality.

2. Veterinary medical endoscopes

For small-animal clinics and livestock veterinary equipment; used for animal respiratory and urinary tract, oral and body-cavity exploration; suited to veterinary bronchoscope and uroscope imaging modules, supporting disposable and semi-reusable veterinary endoscopic products.

✅ Industrial inspection field

Internal inspection of small pipes, cavity inspection of mechanical equipment, defect detection in narrow box gaps; hydraulic pipelines and mould cavity observation; component defect detection; portable high-definition endoscopic inspection equipment.

✅ Product-form adaptation

This OV9734 long-line endoscope module has a probe that can be packaged to 3.6-4.0 mm, a cable that can be made to order from 3 to 4 m and a custom-replaceable lens; the module can be matched with a UVC image decoder board.

Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as ENT and oral inspection.

Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into cavities.

✅ Product overview

The OV9734 long-line endoscope module is developed on a 720P PureCel imaging chip. The probe can be packaged to a 3.6-4.0 mm outer diameter and the cable supports 3-4 m MIPI long-line transmission; the lens is custom-replaceable and the module has comprehensive on-chip DPC and ABLC image preprocessing. It fully covers the three directions of disposable / semi-reusable human clinical endoscopy, veterinary endoscopy and precision industrial inspection; it supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, otoscopes, dental scopes and other devices.

✅ Customisation and integration

The OV9734 imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are completed in-house. Customers may provide parameters including probe outer diameter, total cable length (3-4 m), metal tube material and length, lens FOV requirements, LED configuration and mating board requirements; we can provide solution evaluation, sample prototyping through to mass production supply.

Service Advantages

  • Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
  • Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
  • Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;

Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;

  1. Full-chain technical service

    Covering endoscope image processing from hardware to the application layer;

  2. Cross-platform coverage

    Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;

Leave a Message
Contact us:
Email: Sales@hairayvision.com