OCH02B30 Long-Line Endoscope Camera Module
Product Videos
Downloads
OCH02B30 Long-Line Endoscope Camera Module

Note: the OCH02B30 image sensor is a purchased component; the complete long-line probe, cable processing, probe assembly, tuning and finished-product testing are all completed in-house. The probe can be packaged into a 4.0 mm outer-diameter long-line module, and the module can be matched with a UVC image-processing decoder board, supporting full-process custom development for customers.
1. Product Features
High-performance CubeChip micro 2MP imaging solution with a 4.0 mm probe. It uses the OmniVision OCH2B30-RAUA CameraCubeChip chip-scale packaged sensor with PureCel Plus-S back-illuminated technology, delivering 1500 x 1500 effective pixels. The highly integrated chip needs no extra base, allowing the probe to be packaged to a 4.0 mm outer diameter for access to narrow cavities; the native diagonal field of view reaches 140 deg, giving a wide endoscopic view that balances clarity with insertion passage. The sensor itself cannot be autoclaved; if used in a medical complete device, the customer must complete device sterilisation, registration and safety validation.
MIPI 2-Lane long-line customisation with stable long-distance output. The module uses a 2-Lane MIPI TX interface at up to 1.0 Gbps per lane; cable length is made to order from 10 cm to 4 m and cable diameter can be customised. We perform impedance matching and signal-integrity optimisation for long MIPI signals, suppressing attenuation, screen artefacts and packet loss caused by long cables; it can interface directly with a UVC image-processing decoder board to rapidly build a complete endoscopic imaging system and shorten customer development cycles.
Fully customisable mechanical structure
Probe housing options include stainless steel tube and copper tube; rigid tube section length is made to order; the probe end face supports grinding and chamfering, reducing insertion snagging and improving safety.
Total cable length, cable diameter, tail connector model and cable exit method can all be customised to the complete device structure.
Compatible with rigid, flexible and spring-tube endoscopes in multiple mechanical forms.
Optics and illumination customised on demand. The lens FOV can be tailored to project requirements; the full LED light source can be customised, including LED count and specification, with series and parallel circuit schemes supported. The chip integrates hardware PWM / Strobe outputs that directly drive LEDs for dynamic brightness adjustment, adapting to different light and dark cavity environments.
Comprehensive on-chip image preprocessing reduces back-end development effort. The sensor integrates automatic black-level calibration ABLC, dynamic defect-pixel correction DPC and white-balance gain control; it supports staggered HDR dual exposure for scenes with strong light-dark contrast; Group-hold multi-register frame-synchronous updates switch parameters seamlessly between frames; an on-chip temperature sensor reads the die junction temperature for device overheat protection; built-in colour-bar and rolling-bar test patterns ease production-line debugging and device verification.
Complete in-house production and delivery system. The sensor is purchased externally; probe assembly, cable crimping and soldering, signal tuning, burn-in and finished-product testing are all completed in-house. We provide requirement evaluation, sample prototyping and delivery from small batches to mass production, and can support customers in register tuning for rapid complete-device integration.
2. Functions and Parameters
1. Core Imaging Sensor Specifications (OCH02B30)
| Item | Specification |
|---|---|
| Sensor model | OCH2B30-RAUA (CameraCubeChip) |
| Optical format | 1/7.5", PureCel Plus-S back-illuminated BSI colour CMOS |
| Active resolution | 1500 x 1500 (2 megapixels) |
| Pixel size | 1.116 um x 1.116 um |
| Native diagonal FOV | 140 deg, Fno 5.5 |
| Frame rate | Full frame 1500x1500@60fps; staggered HDR 30fps; cropped / binned 1280x720@120fps, 960x540, 640x480 and more |
| Output interface | 2-Lane MIPI-TX, up to 1.0 Gbps per lane |
| Output format | 10-bit RAW RGB |
| Exposure mode | Electronic rolling shutter; staggered HDR dual exposure; min 4 lines, max (VTS-8) lines |
| Max analogue gain | 15.5x |
| Signal-to-noise ratio | 37.4 dB |
| Dynamic range | 74.5 dB @ 15.5x gain |
| Power consumption | Active 124 mW (1500x1500@60fps); standby 2 mA |
| Operating temperature | -20 C to +70 C; stable image 0 C to 50 C |
| Control interface | SCCB serial control bus |
| Built-in hardware resources | On-chip temperature sensor; OTP one-time programmable memory; PWM / Strobe LED drive output; FSIN frame sync input; Group-hold register update; built-in colour-bar and rolling-bar test patterns |
| Core ISP functions | Automatic black-level calibration ABLC; dynamic defect-pixel correction DPC; white-balance gain; 2x2 binning; window ROI crop; mirror / flip; staggered HDR dual exposure |
| Notes | Chip non-autoclavable; do not sterilise by autoclave |
2. Mechanical Structure Customisation Parameters
| Item | Specification & Customisation Range |
|---|---|
| Probe outer diameter | Packaged down to 4.0 mm |
| Total cable length | 10 cm - 4 m, made to order |
| Cable diameter | Customer-specified wire gauge |
| Probe housing | Stainless steel tube or copper tube (choose one) |
| Rigid tube length | Custom; tip grinding and chamfering available |
| Tail connector | Connector model and cable exit customisable |
| Production model | OCH2B30 sensor purchased externally; probe, cable, welding / assembly and all testing completed in-house |
3. Optical & Illumination Customisation Parameters
| Item | Customisable Content |
|---|---|
| Lens FOV | Customised to the customer complete device requirements |
| LED light source | LED count and specification customisable; series / parallel circuits; on-chip hardware PWM output supports dynamic LED brightness control |
4. Hardware Integration Capabilities
Image output: 2-Lane MIPI output, can be matched with a UVC image-processing decoder board to rapidly set up a complete endoscopic imaging system.
Long-line optimisation: MIPI impedance matching tuned for long cables reduces long-line transmission interference and ensures stable image output.
Expansion: FSIN frame-sync input supports multi-sensor frame synchronisation; the SCCB interface makes it easy for the host to read and write registers for tuning.
5. Core Product Functions
Multi-mode readout: full-frame output, 2x2 binning pixel combining, horizontal / vertical subsampling and window ROI cropping; lower resolution raises frame rate and suppresses motion blur; multiple preset resolutions are supported.
Image correction and preprocessing: automatic black-level calibration ABLC, real-time dynamic defect-pixel correction DPC; manual white-balance gain adjustment; horizontal / vertical mirror flip; built-in colour-bar and rolling-bar test patterns for production-line debugging and verification.
Flexible exposure and gain control: long / short dual-channel staggered HDR exposure; exposure time, analogue gain and digital gain can be configured independently; Group-hold multi-register frame-synchronous updates apply parameters on the next frame with no image tearing, facilitating AE auto-exposure and AGC auto-gain algorithm development.
LED illumination hardware control: multiple Strobe and PWM outputs support xenon and a variety of LED drive modes; pulse polarity and width are configurable, suiting closed-loop LED brightness control in endoscopic probes.
Temperature monitoring and status feedback: an on-chip temperature sensor reads the die junction temperature; Embedded line output returns sensor status such as exposure, gain and frame count.
Stable long-distance imaging: supports 10 cm to 4 m long cables with impedance matching tuning for stable long-distance image output.
※ Typical Applications

Important: the manufacturer has not performed fail-safe validation for the OCH2B30-RAUA in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.
✅ Medical field
1. Human clinical endoscopes
Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), choledochoscopes, arthroscopes, transforaminal endoscopes, neuroendoscopes, dental scopes, hysteroscopes, proctoscopes, etc. Applicable departments: respiratory medicine, urology, orthopaedics, neurology, stomatology, gynaecology and proctology. Product-form fit: supports disposable and semi-reusable endoscopes; compatible with rigid, flexible and spring-tube endoscope structures.
2. Veterinary medical endoscopes
For small-animal clinics and livestock veterinary equipment; used for animal oral, ear, respiratory and body-cavity exploration; can serve as veterinary bronchoscope and uroscope imaging modules.
✅ Industrial inspection field
Internal inspection of small pipes, cavity inspection of precision equipment, defect detection in narrow gaps; mould cavity inspection; hydraulic and aerospace pipeline endoscopy; internal defect observation of components; special portable inspection equipment.
✅ Product-form adaptation
This OCH02B30 long-line endoscope camera module has a probe that can be packaged to a 4.0 mm outer diameter, a cable length made to order from 10 cm to 4 m, and can be matched with a UVC image-processing decoder board.
Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as arthroscopy, oral and ENT inspection.
Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into cavities.
✅ Product overview
The OCH02B30 long-line endoscope camera module is developed on a 2-megapixel CameraCubeChip micro imaging chip. The probe can be packaged to a 4.0 mm outer diameter and supports up to 4 m MIPI long-line transmission with staggered-HDR high-dynamic imaging; it fully covers human clinical endoscopy, veterinary endoscopy and precision industrial inspection, and supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, arthroscopes, dental scopes and other devices.
✅ Customisation and integration
The OCH02B30 imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are completed in-house. Customers may provide parameters including probe outer diameter, total cable length, metal tube material and length, lens FOV, LED configuration and interface board requirements; we can provide solution evaluation, sample prototyping through to mass production supply.
Service Advantages
- Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
- Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
- Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;
Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;
-
Full-chain technical service
Covering endoscope image processing from hardware to the application layer;
-
Cross-platform coverage
Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;