OV2740 Long-Line Endoscope Camera Module
Product Videos
Downloads
OV2740 Long-Line Endoscope Camera Module

Note: the OV2740 image sensor is a purchased component; the complete long-line probe, cable processing, probe assembly, tuning and finished-product testing are all completed in-house. The probe can be packaged into a 5.0–5.5 mm outer-diameter long-line module, with cable length made to order at 3–4 m. The lens is customisable and replaceable. The module can be matched with a UVC image-processing decoder board, supporting full-process custom development for customers. Important: the sensor itself cannot be autoclaved; the manufacturer has not performed fail-safe validation for Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's sterilisation, performance, safety and registration certification; we provide only the imaging camera module hardware.
1. Product Features
1080P high-definition imaging, 5.0–5.5 mm probe outer diameter, customisable and replaceable lens. It uses the OmniVision OV2740 PureCel 1/6-inch CMOS image sensor, delivering 1920×1080 full-HD 1080P resolution with a 1.4 μm pixel size for rich imaging detail and accurate colour reproduction. The probe can be packaged down to a 5.0–5.5 mm outer diameter, balancing high-definition image quality with passage performance through narrow cavities. The lens is customisable and replaceable, with FOV, focal length and depth of field adjustable to suit different endoscopic viewing conditions. Well suited to mid-range semi-reusable and disposable endoscope product development.
MIPI long-line transmission with 3–4 m signal-integrity optimisation. The module supports 1–2 Lane MIPI CSI-2 output at up to 1000 Mbps per lane, with cable length made to order at 3–4 m. We perform impedance matching and differential signal-integrity tuning for long-distance MIPI signals, effectively suppressing attenuation, screen artefacts, packet loss and interference noise caused by long cables. The module can interface directly with a UVC image-processing decoder board to rapidly convert to USB digital image output, greatly shortening customer development cycles.
Fully customisable mechanical structure
Probe housing options include stainless steel tube and copper tube; rigid tube section length is made to order; the probe end face supports grinding and chamfering, reducing insertion snagging risk and improving safety.
Total cable length is 3–4 m to order; cable diameter can be selected as required; tail connector model and cable exit method can all be customised to the complete device structure.
Compatible with rigid, flexible and spring-tube endoscopes in multiple mechanical forms.
Flexible optics and illumination customisation. The lens FOV, focal length and depth of field are customisable and replaceable; the full LED light source can be customised, including LED count and specification, with series and parallel circuit schemes supported. The chip integrates multiple Strobe flash control outputs, supporting xenon and multi-mode LED strobe drive, enabling dynamic LED brightness adjustment for complex light and dark conditions inside cavities.
Comprehensive on-chip ISP preprocessing reduces back-end development effort. The sensor integrates staggered Staggered-HDR / HDR-lite high-dynamic imaging for cavities with strong light-dark contrast; it incorporates DPC dynamic bad-pixel correction, BLC black-level correction and LENC lens-shading correction; an OTP one-time-programmable memory stores calibration parameters; Group-hold multi-register frame-synchronous updates switch parameters seamlessly between frames without image tearing; hardware and software dual standby low-power modes suit battery-powered portable devices; an SCCB control bus makes it easy for customers to tune AE auto-exposure and AGC auto-gain algorithms.
Complete in-house production and delivery system. The sensor is purchased externally; probe assembly, cable crimping and soldering, signal tuning, burn-in and finished-product testing are all completed in-house. We provide requirement evaluation, sample prototyping and delivery from small batches to mass production, and can support customers in SCCB register tuning for rapid complete-device integration.
1. Core Imaging Sensor Specifications (OV2740)
| Item | Specification |
|---|---|
| Sensor model | OV2740 (PureCel colour CMOS) |
| Optical format | 1/6", CRA 32 deg. |
| Active resolution | 1920 x 1080 (2 MP, 1080P) |
| Pixel size | 1.4 um x 1.4 um |
| Lens configuration | Customisable and replaceable; FOV, focal length and depth of field on demand |
| Frame rate | 1920x1080@60fps; 1280x720@90fps; 640x480@120fps; QVGA@240fps |
| Output interface | 1-2 Lane MIPI-TX, up to 1000 Mbps per lane; LVDS output |
| Data format | 10-bit RAW RGB |
| Power supply | AVDD analogue 2.8 V; core DOVDD 1.2 V; IO DOVDD 1.8 V |
| Power consumption | Operation 153 mW; software standby 116 uA; hardware XSHUTDN 0.15 uA |
| Operating temperature | -30 C to +85 C; stable image 0 C to 60 C |
| Control interface | SCCB 2-wire serial bus; FSIN frame synchronisation input |
| OTP memory | 4 kbit OTP; 2 kbit user-programmable for calibration parameters |
| Core imaging functions | Staggered-HDR / HDR-lite; 2x2 binning; window ROI crop; mirror / flip; DPC; BLC; LENC; Strobe multi-mode flash; Group-hold register update; ultra-low-power mode; built-in test patterns |
| Notes | Chip non-autoclavable; do not sterilise by autoclave |
2. Mechanical Structure Customisation Parameters
| Item | Specification & Customisation Range |
|---|---|
| Probe outer diameter | 5.0-5.5 mm packaged |
| Total cable length | 3-4 m, made to order |
| Cable diameter | Customer-specified wire gauge |
| Probe housing | Stainless steel tube or copper tube (choose one) |
| Rigid tube length | Custom; tip grinding and chamfering available |
| Tail connector | Connector model and cable exit customisable |
| Lens note | Customisable and replaceable; FOV, focal length and DOF adjustable |
| Production model | OV2740 sensor purchased externally; probe, cable, welding / assembly and all testing completed in-house |
3. Optical & Illumination Customisation Parameters
| Item | Customisable Content |
|---|---|
| Lens FOV | Fixed and non-modifiable; lens not replaceable |
| LED light source | LED count and specification customisable; series / parallel circuits; pseudo-global-shutter LED strobe suppresses motion blur |
4. Hardware Integration Capabilities
Image output: 1–2 Lane MIPI output, can be matched with a UVC image-processing decoder board to rapidly set up a complete endoscopic imaging system.
Long-line optimisation: MIPI impedance matching tuned for the 3–4 m cable reduces transmission interference noise and ensures stable image output.
Control interface: SCCB interface reads/writes registers for exposure, gain and mode-switch tuning; FSIN frame synchronisation is supported for multi-sensor synchronous capture.
Auxiliary output: Strobe signal output can directly drive external LED / xenon flash lamps.
5. Core Product Functions
Multi-resolution, multi-frame-rate readout: supports 1080P full-frame, 720P, VGA, QVGA and other resolution options; 2×2 binning pixel combining and window ROI cropping; lower resolution raises frame rate and effectively suppresses motion blur, fitting complete-device schemes with different bandwidths.
High-dynamic HDR imaging: supports both HDR-lite and Staggered-HDR high-dynamic modes with independent long and short exposure configuration, improving imaging in scenes with excessive light-dark contrast inside cavities; image fusion is completed at the back end.
Built-in image preprocessing: DPC dynamic bad-pixel correction, BLC automatic black-level correction and LENC lens-shading correction; horizontal / vertical mirror flip for endoscope assembly; OTP storage can fix customer calibration parameters, simplifying production-line calibration.
Flexible exposure and gain configuration: long and short channel exposure time, analogue gain and digital gain can be configured independently; Group-hold register groups implement frame-synchronous parameter updates with no image tearing, facilitating AE auto-exposure and AGC auto-gain algorithm development.
Light-source synchronous control: an internal Strobe flash control unit supports xenon and four LED working modes, with programmable pulse polarity and width, suiting strobe fill light inside endoscopic cavities and reducing motion artefacts.
Multi-level power management: software standby (SCCB communication retained) and hardware XSHUTDN hardware standby down to 0.15 μA, suiting battery-powered portable endoscopic devices.
Stable long-distance imaging: supports 3–4 m long cables with impedance matching tuning for stable MIPI long-line image output; FSIN frame-sync input enables multi-sensor synchronous capture; multiple built-in production test patterns ease module production debugging.
※ Typical Applications

Important: the manufacturer has not performed fail-safe validation for the OV2740 in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.
✅ Medical field
1. Human clinical endoscopes (suited to disposable and semi-reusable endoscopes)
Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), choledochoscopes, hysteroscopes, dental scopes and proctoscopes. Applicable departments: respiratory medicine, urology, ENT, stomatology, gynaecology and proctology. Product-form fit: supports disposable and semi-reusable endoscope solutions; compatible with rigid, flexible and spring-tube endoscope structures; the 5.0–5.5 mm probe outer diameter and high-definition 1080P imaging balance cavity passage performance with image quality.
2. Veterinary medical endoscopes
For small-animal clinics and livestock veterinary equipment; used for animal respiratory, urinary, oral and body-cavity exploration; suited to veterinary bronchoscope and uroscope imaging modules, supporting disposable and semi-reusable veterinary endoscopic products.
✅ Industrial inspection field
Internal inspection of medium and large pipes, cavity inspection of mechanical equipment, defect detection in narrow box gaps; observation of hydraulic lines and mould cavities; component defect detection; portable high-definition inspection equipment and security endoscope equipment.
✅ Product-form adaptation
This OV2740 long-line endoscope camera module has a probe that can be packaged to 5.0–5.5 mm, a cable length made to order at 3–4 m, a customisable and replaceable lens, and can be matched with a UVC image-processing decoder board.
Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as ENT, oral and joint inspection.
Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into cavities.
✅ Product overview
The OV2740 long-line endoscope camera module is developed on a 2-megapixel PureCel high-definition imaging chip. The probe achieves a 5.0–5.5 mm outer diameter and supports 3–4 m MIPI long-line transmission; the lens is customisable and replaceable, with built-in HDR high-dynamic and DPC, BLC, LENC complete on-chip image preprocessing; it fully covers three major directions — disposable / semi-reusable human clinical endoscopy, veterinary endoscopy and precision industrial inspection — and supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, otoscopes, dental scopes and other endoscopic devices.
✅ Customisation and integration
The OV2740 imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are completed in-house. Customers may provide requirement parameters including probe outer diameter, total cable length (3–4 m), metal tube material and length, lens FOV customisation requirements, LED configuration and interface board requirements; we can provide solution evaluation, sample prototyping through to mass production supply.
Service Advantages
- Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
- Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
- Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;
Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;
-
Full-chain technical service
Covering endoscope image processing from hardware to the application layer;
-
Cross-platform coverage
Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;