OV6946 Long-Line Endoscope Camera Module
Product Videos
Downloads
OV6946 Long-Line Endoscope Camera Module

Note: the OV6946 image sensor is a purchased component; the complete long-line probe, cable processing, probe assembly, tuning and finished-product testing are all completed in-house. The probe can be packaged into a 1.6–2.0 mm outer-diameter long-line module, with cable length made to order at 3–4 m. The lens is fixed at the factory and cannot be customised or replaced. The module can be matched with a UVC image-processing decoder board, supporting full-process custom development for customers including mechanical structure, LED and connector. Important: the sensor itself cannot be autoclaved; the manufacturer has not performed fail-safe validation for Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's sterilisation, performance, safety and registration certification; we provide only the imaging camera module hardware.
1. Product Features
Ultra-compact OmniBSI back-illuminated imaging, 1.6–2.0 mm ultra-fine probe, fixed non-replaceable lens. It uses the OmniVision OV6946 CSP3 ultra-small package sensor with a 1/18" optical format, OmniBSI™ back-illuminated process and 400×400 square imaging format. The tiny chip allows the probe to reach a 1.6–2.0 mm outer diameter for access to extremely narrow cavities. The lens is fixed at the factory; FOV, focal length and depth of field cannot be customised or replaced. High sensitivity reaches 1000 mV/Lux-sec for excellent low-light imaging, with 34.4 dB signal-to-noise ratio and 67.1 dB dynamic range, making it well suited to disposable ultra-fine endoscope products.
VOUT analogue long-line output with 3–4 m signal optimisation. The module uses VOUT analogue video output with a cable length made to order at 3–4 m. We perform impedance matching and signal-integrity tuning for long-distance analogue output, reducing attenuation, interference and noise. The module can interface directly with a UVC image-processing decoder board to convert analogue signals into digital image output, rapidly building a complete endoscopic imaging system and shortening customer development cycles.
Fully customisable mechanical structure (except the lens)
Probe housing options include stainless steel tube and copper tube; rigid tube section length is made to order; the probe end face supports grinding and chamfering, reducing insertion snagging risk and improving safety.
Total cable length is fixed at 3–4 m to order; cable diameter can be selected as required; tail connector model and cable exit method can all be customised to the complete device structure.
Compatible with rigid, flexible and spring-tube endoscopes in multiple mechanical forms, focused on disposable ultra-fine endoscope solutions.
Flexible illumination customisation. The full LED light source can be customised, including LED count and type, with series and parallel circuit schemes supported. LED brightness can be dynamically adjusted with the back-end controller to suit changing light and dark conditions inside cavities.
SPI serial interface for simple configuration and minimal peripherals. All sensor registers are configured through the SPI serial interface; the on-chip PLL needs only an external 4 MHz clock; a single 3.3 V supply keeps probe-side components to a minimum for extremely small probe layouts. Exposure time and AGC gain can be set manually for AE and AGC algorithm development.
Complete in-house production and delivery system. The sensor is purchased externally; probe assembly, cable crimping and soldering, signal tuning, burn-in and finished-product testing are all completed in-house. We provide requirement evaluation, sample prototyping and delivery from small batches to mass production, and can support customers in SPI register tuning for rapid complete-device integration.
1. Core Imaging Sensor Specifications (OV6946)

2. Mechanical Structure Customisation Parameters

3. Optical & Illumination Customisation Parameters

4. Hardware Integration Capabilities
Image output: VOUT analogue output, can be matched with a UVC image-processing decoder board to convert analogue to digital images and rapidly set up a complete endoscopic imaging system.
Long-line optimisation: impedance matching tuned for the 3–4 m cable reduces transmission interference noise and ensures stable image output.
Control interface: SPI interface reads/writes registers for exposure and gain parameter configuration.
5. Core Product Functions
Fixed-frame output: 400×400@30fps square imaging output, suited to ultra-fine endoscope viewing fields.
Manual exposure and gain control: AEC exposure time and AGC analogue gain can be configured independently through SPI, supporting external controllers in AE and AGC algorithm development.
Simplified peripheral design: single 3.3 V supply and on-chip PLL require only a 4 MHz external clock; the probe has very few components, meeting the 1.6–2.0 mm ultra-small probe layout constraint.
Analogue long-distance output: impedance matching is tuned for the 3–4 m cable for stable analogue video output; a back-end UVC decoder board converts it to digital images.
Power-on auto reset: an internal power-on reset circuit enters the working state immediately after power-up, simplifying complete-device power control.
※ Typical Applications

Important: the manufacturer has not performed fail-safe validation for the OV6946 in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.
✅ Medical field
1. Human clinical endoscopes (focused on ultra-fine disposable endoscopes)
Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), hysteroscopes, dental scopes and other ultra-fine-diameter endoscopes. Applicable departments: respiratory medicine, urology, ENT, stomatology and gynaecology. Product-form fit: focused on disposable and semi-reusable endoscope solutions; compatible with rigid, flexible and spring-tube endoscope structures; the 1.6–2.0 mm ultra-fine probe outer diameter suits access and inspection in extremely narrow cavities.
2. Veterinary medical endoscopes
For small-animal clinics and livestock veterinary equipment; used for animal ear canals, respiratory tracts, urinary cavities and oral inspection; suited to veterinary ultra-fine bronchoscope and uroscope imaging modules, ideal for disposable veterinary endoscopic products.
✅ Industrial inspection field
Internal inspection of ultra-fine tubes, cavity inspection of precision micro-parts, defect detection in micro-gaps; observation of micro-pipe and miniature-mould cavities; micro-component defect detection; special portable ultra-fine inspection equipment.
✅ Product-form adaptation
This OV6946 long-line endoscope camera module has a probe that can be packaged to 1.6–2.0 mm, a cable length made to order at 3–4 m, a fixed non-replaceable lens, and can be matched with a UVC image-processing decoder board.
Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as ENT and oral.
Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into extremely narrow cavities, especially disposable flexible endoscopes.
✅ Product overview
The OV6946 long-line endoscope camera module is developed on a 160 kPixel OmniBSI™ ultra-compact analogue imaging chip. The probe achieves a 1.6–2.0 mm ultra-fine outer diameter and supports 3–4 m analogue long-line transmission; the lens is fixed at the factory and cannot be replaced; SPI control, a single 3.3 V supply and minimal probe peripherals complete the design. It fully covers three major directions — disposable human clinical endoscopy, veterinary endoscopy and precision inspection of tiny industrial cavities — and supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, otoscopes, dental scopes and other ultra-fine endoscopic devices.
✅ Customisation and integration
The OV6946 imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are completed in-house. Customers may provide requirement parameters including probe outer diameter, total cable length (fixed at 3–4 m), metal tube material and length, LED configuration and interface board requirements (the lens is fixed and FOV cannot be modified); we can provide solution evaluation, sample prototyping through to mass production supply.
Service Advantages
- Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
- Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
- Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;
Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;
-
Full-chain technical service
Covering endoscope image processing from hardware to the application layer;
-
Cross-platform coverage
Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;