OV01A10 Long-Line Endoscope Camera Module
Product Videos
Downloads
OV01A10 Long-Line Endoscope Camera Module

Note: the OV01A10 image sensor is a purchased component; the complete long-line probe, cable processing, probe assembly, tuning and finished-product testing are all completed in-house. The probe can be packaged into a 3.0–3.5 mm outer-diameter long-line module, with cable length made to order at 2–3 m. The lens supports custom replacement. The module can be matched with a UVC image-processing decoder board, supporting full-process custom development for customers. Important: the sensor itself cannot be autoclaved; the manufacturer has not performed fail-safe validation for Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's sterilisation, performance, safety and registration certification; we provide only the imaging camera module hardware.
1. Product Features
High-performance stacked-process imaging, 3.0–3.5 mm probe outer diameter, custom-replaceable lens. It uses the OmniVision OV01A10 sensor with a 1/11" optical format, PureCel®Plus stacked chip process and 1.116 μm pixel size. The effective resolution is 1280×800 (megapixel class), capable of 720P HD output. The probe can be packaged to a 3.0–3.5 mm outer diameter, balancing image quality with access; the lens can be custom-replaced, with FOV, focal length and depth of field adjustable to suit different endoscopic viewing conditions. It supports Bayer colour output with excellent colour reproduction, suitable for mid-range disposable and semi-reusable endoscope development.
1-Lane MIPI long-line transmission with 2–3 m cable signal optimisation. The module uses dual 1-Lane MIPI / LVDS outputs; cable length is made to order from 2–3 m. We perform impedance matching and signal-integrity tuning for long-distance MIPI signals, improving attenuation, screen artefacts and packet loss in long-line scenarios. The module can interface with a UVC image-processing decoder board to quickly convert MIPI signals into USB digital image output, shortening complete-device development cycles.
Fully customisable mechanical structure
Probe housing options include stainless steel tube and copper tube; rigid tube section length is made to order; the probe end face supports grinding and chamfering, reducing insertion snagging risk and improving safety.
Total cable length is fixed at 2–3 m to order; cable diameter can be selected as required; tail connector model and cable exit method can all be customised to the complete device structure.
Compatible with rigid, flexible and spring-tube endoscopes in multiple mechanical forms.
Flexible optics and illumination customisation. Lens FOV, focal length and depth of field can be customised and replaced; the full LED light source can be customised, including LED count and type, with series and parallel circuit schemes supported. LED brightness can be dynamically adjusted with the back-end controller to suit changing light and dark conditions inside cavities.
Built-in complete on-chip ISP reduces back-end development workload. It integrates DPC dynamic defect correction and ABLC automatic black-level calibration; supports 2× Binning pixel combining, window ROI cropping and image mirror/flip; includes OTP one-time programmable memory for calibration parameters; the SCCB two-wire serial bus configures registers with flexible frame rate, gain and exposure adjustment for AE and AGC algorithm development. Dual on-chip PLLs provide flexible clock configuration. Multi-level hardware and software standby power management suits battery-powered portable devices.
Complete in-house production and delivery system. The sensor is purchased externally; probe assembly, cable crimping and soldering, signal tuning, burn-in and finished-product testing are all completed in-house. We provide requirement evaluation, sample prototyping and delivery from small batches to mass production, and can support customers in SCCB register tuning for rapid complete-device integration.
Core Imaging Sensor Specifications (OV01A10)
| Item | Specification |
|---|---|
| Sensor model | OV01A10 (PureCel®Plus stacked die, Bayer colour) |
| Optical format | 1/11", CRA 32° |
| Active resolution | 1280 × 800 (1 megapixel) |
| Pixel size | 1.116 μm × 1.116 μm |
| Lens configuration | Customisable and replaceable; FOV, focal length and depth of field adjustable as required |
| Frame rate | 1280×800@60fps; 720P(1280×720)@60fps; VGA 640×480@90fps |
| Output interface | 1-Lane MIPI / LVDS |
| Output data format | 8-bit / 10-bit RGB RAW |
| Power supply | Analogue AVDD 2.7–3.0 V (typ. 2.8 V); core DOVDD 1.14–1.26 V (typ. 1.2 V); IO DOVDD 1.7–1.9 V (typ. 1.8 V) |
| Power consumption | Operation 82.2 mW; software standby 0.5 mA; hardware XSHUTDN standby 2 μA |
| Operating temperature | -30°C to +85°C; stable image 0°C to 60°C |
| Control interface | SCCB 2-wire serial bus; FSIN frame synchronisation; dual on-chip PLL |
| On-chip memory | 32-byte OTP memory for customer calibration parameters |
| Core imaging functions | 2×2 Binning; window ROI crop; mirror / flip; DPC; ABLC; frame rate / exposure / gain programmable; hardware & software standby; multiple group output |
| Notes | Chip non-autoclavable; cannot be sterilised by autoclave |
2. Mechanical Structure Customisation Parameters
| Item | Specification & Customisation Range |
|---|---|
| Probe outer diameter | 3.0–3.5 mm packaged |
| Total cable length | 2–3 m, made to order |
| Cable diameter | Customer-specified |
| Probe housing | Stainless steel tube or copper tube (choose one) |
| Rigid tube length | Custom; tip grinding and chamfering available |
| Tail connector | Connector model and cable exit customisable |
| Lens note | Customisable and replaceable; FOV, focal length and DOF adjustable |
| Production model | OV01A10 sensor purchased externally; probe, cable, welding / assembly and all testing completed in-house |
3. Optical & Illumination Customisation Parameters
| Item | Customisable Content |
|---|---|
| Lens FOV | Fixed and non-modifiable; lens not replaceable |
| LED light source | LED count and specification customisable; series / parallel circuits; pseudo-global-shutter LED strobe suppresses motion blur |
4. Hardware Integration Capabilities
Image output: 1-Lane MIPI / LVDS output, can be matched with a UVC image-processing decoder board to rapidly set up a complete endoscopic imaging system.
Long-line optimisation: impedance matching tuned for the 2–3 m cable reduces transmission interference noise and ensures stable image output.
Control interface: SCCB interface reads/writes registers for exposure, gain and mode-switch tuning; supports FSIN frame synchronisation and multi-sensor synchronous capture.
5. Core Product Functions
Multi-resolution and multi-frame-rate readout: supports 1280×800 full frame, 720P, VGA and other resolutions; supports 2× Binning and window ROI cropping to lower resolution, raise frame rate and reduce motion smear.
Built-in image preprocessing: DPC dynamic defect correction, ABLC automatic black-level calibration; horizontal / vertical mirror flip for endoscope assembly; OTP can store customer calibration parameters.
Flexible exposure and gain configuration: exposure time, analogue gain and digital gain can be configured independently; registers can be updated between frames for AE and AGC algorithm development.
Dual-PLL flexible clock configuration: dual on-chip PLLs with flexible external clock input suit different controller platforms; supports FSIN frame sync input for multi-sensor synchronous capture.
Multi-level power management: software standby (retaining SCCB communication) and hardware XSHUTDN standby, with minimum power consumption of 2 μA, suited to battery-powered portable endoscopic devices.
Stable long-distance imaging: adapted to 2–3 m cables with impedance matching tuning for stable MIPI output over long lines.
※ Typical Applications

Important: the manufacturer has not performed fail-safe validation for the OV01A10 in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.
✅ Medical field
1. Human clinical endoscopes (for disposable and semi-reusable endoscopes)
Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), choledochoscopes, hysteroscopes and dental scopes. Applicable departments: respiratory medicine, urology, ENT, stomatology and gynaecology. Product-form fit: supports disposable and semi-reusable endoscope solutions; compatible with rigid, flexible and spring-tube endoscope structures; the 3.0–3.5 mm probe outer diameter balances image quality with cavity access.
2. Veterinary medical endoscopes
For small-animal clinics and livestock veterinary equipment; used for animal respiratory tracts, urinary cavities, oral and body cavity exploration; suited to veterinary bronchoscope and uroscope imaging modules, supporting disposable and semi-reusable veterinary endoscopic products.
✅ Industrial inspection field
Internal inspection of small pipes, cavity inspection of precision parts, defect detection in narrow gaps; observation of pipe and mould cavities; component defect detection; portable HD endoscopic inspection equipment.
✅ Product-form adaptation
This OV01A10 long-line endoscope camera module has a probe that can be packaged to 3.0–3.5 mm, a cable length made to order at 2–3 m, a custom-replaceable lens, and can be matched with a UVC image-processing decoder board.
Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as ENT and oral.
Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into cavities.
✅ Product overview
The OV01A10 long-line endoscope camera module is developed on a megapixel PureCel®Plus stacked-process imaging chip. The probe achieves a 3.0–3.5 mm outer diameter and supports 2–3 m MIPI long-line transmission; the lens supports custom replacement; built-in DPC, ABLC, OTP and other complete on-chip image preprocessing. It fully covers three major directions — disposable / semi-reusable human clinical endoscopy, veterinary endoscopy and precision industrial inspection — and supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, otoscopes, dental scopes and other endoscopic devices.
✅ Customisation and integration
The OV01A10 imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are completed in-house. Customers may provide requirement parameters including probe outer diameter, total cable length (2–3 m), metal tube material and length, lens FOV requirements, LED configuration and interface board requirements; we can provide solution evaluation, sample prototyping through to mass production supply.
Service Advantages
- Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
- Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
- Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;
Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;
-
Full-chain technical service
Covering endoscope image processing from hardware to the application layer;
-
Cross-platform coverage
Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;