★ National High-Tech Enterprise AI Imaging & Camera Module Customization
HomeProductsSolutionsApplications CustomizationTechnologyCustom CasesAboutContact

OCHSA10 Long-Line Endoscope Camera Module

Product Videos

Video coming soon

OCHSA10RAQA Long-Line Endoscope Camera Module

Compatible image-processing decoder board

Note: The OCHSA10RAQA image sensor is a purchased component; the entire long-line probe, cable processing, probe assembly, tuning and finished-product testing are all completed in-house. The probe can be packaged into a long-line module with an outer diameter of 2.2–2.5 mm, and the module can be matched with a UVC image-processing decoder board, supporting full-process custom development for customers. Important: the sensor itself cannot be autoclaved; the manufacturer has not performed fail-safe validation for Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's sterilisation, performance, safety and registration certification; we provide only the imaging camera module hardware.

I. Product & Features

Ultra-compact CubeChip imaging solution enabling a 2.2–2.5 mm ultra-thin probe outer diameter. It adopts the OmniVision OCHSA10RAQA CameraCubeChip® chip-scale packaged sensor with a 1/14.25" optical format, PureCel®Plus-S back-illuminated pixel technology and an 800×800 square imaging format; the probe can achieve a 2.2–2.5 mm outer diameter for access to narrow cavities. Native diagonal field of view 90°±2°, low distortion <|3%|, depth of field 9–110 mm, clear and stable close-range endoscopic imaging. High full-well capacity, low noise, virtually no blooming, excellent colour crosstalk control and strong low-light imaging make it ideal for disposable endoscope development.

MIPI long-line transmission solution with long-distance signal-integrity optimisation. The module supports 1-Lane MIPI / LVDS dual output interfaces, with cable length customisable from 10 cm to 4 m and cable diameter made to order. We perform impedance matching and signal-integrity tuning for long MIPI cables, effectively suppressing signal attenuation, screen artefacts and packet loss. The module can directly interface with a UVC image-processing decoder board for rapid analogue-to-digital imaging system setup, shortening the complete device's development cycle.

Fully customisable mechanical structure

Probe housing available in stainless steel tube or copper tube; rigid tube section length made to order; the probe end face supports grinding and chamfering, reducing insertion snagging risk and improving safety.

Total cable length, cable diameter, tail connector model and cable exit method can all be customised to the complete device's structural requirements.

Compatible with rigid, flexible and spring-tube endoscopes in multiple mechanical forms, especially suited to ultra-thin-diameter disposable endoscope structures.

Customisable optics and illumination system. Lens FOV and depth of field can be tailored to project requirements; the full LED light source is customisable, including LED count and type selection, supporting series and parallel circuit schemes. The chip integrates Strobe flash control output to emit pulse signals that synchronise LED illumination, enabling intracavity stroboscopic fill light and improving dynamic image quality.

Rich on-chip ISP preprocessing reduces back-end development workload. The sensor integrates hardware defective-pixel correction (DPC), automatic black-level calibration (ABLC) and manual white-balance gain; it supports 2×2 analogue Binning pixel binning, region-of-interest (ROI) cropping and mirror flipping; Grouphold group-register frame-synchronised updates allow seamless parameter switching between frames with no tearing. Built-in hardware / software dual standby modes with multiple controllable power levels and FSIN frame-sync input support multi-sensor synchronisation, facilitating customers' AE auto-exposure and AGC auto-gain algorithm development.

Complete in-house production and delivery system. The sensor is purchased externally; probe assembly, cable crimping and soldering, signal tuning, burn-in and finished-product testing are all completed in-house. We provide requirement evaluation, sample prototyping and delivery from small batches to mass production, and can support customers in SCCB register tuning for rapid complete-device integration.

 

Core Imaging Sensor Specifications (OCHSA10RAQA)

ItemSpecification
Sensor modelOCHSA10-RAQA (CameraCubeChip®)
Optical format1/14.25", PureCel®Plus-S back-illuminated BSI colour CMOS
Active resolution800 × 800 (0.64 MP)
Pixel size1.116 μm × 1.116 μm
Native diagonal FOV90°±2°; horizontal 70°±2°, Fno 5.1, focal length 0.582 mm
Optical distortion< 3.0%
Depth of field9–110 mm, fixed focus
IR cut-off filter50% cut-off at 665 ± 10 nm
Frame rate800×800@60fps; 400×400@90fps (cropped)
Output interface1-Lane MIPI / 1-Lane LVDS, up to 800 Mbps
Data format10-bit RGB RAW
Colour formatBayer RGB colour mosaic
Power supplyAnalogue AVDD 2.7–3.0 V (typ. 2.8 V); digital DOVDD 1.14–1.26 V (typ. 1.2 V); IO DOVDD 1.7–1.9 V (typ. 1.8 V)
Power consumptionOperational 82.2 mW; software standby 0.5 mA; hardware standby 2 μA
Operating temperature-20°C to +70°C; stable image from 0°C to 50°C
Control interface2-wire SCCB serial bus; supports FSIN frame synchronisation
Core imaging functions2×2 Binning; mirror flip; window cropping ROI; DPC; ABLC; manual white balance; Grouphold register update; Strobe flash output; hardware / software dual standby
NotesNon-autoclavable — do not sterilise by autoclave; supports OTP configuration storage

2. Mechanical Structure Customisation Parameters

ItemSpecification & Customisation Range
Probe outer diameterPackaged from 2.2 to 2.5 mm
Total cable length10 cm to 4 m, made to order
Cable diameterCustomer-specified wire gauge
Probe housingStainless steel tube or copper tube
Rigid tube lengthCustom; tip can be polished and chamfered
Tail connectorConnector type and cable exit customisable
Production modelOCHSA10 sensor purchased externally; probe, cable, welding / assembly and all testing done in-house

3. Optical & Illumination Customisation Parameters

ItemCustomisable Content
Lens FOVTailored to the customer complete device
LED light sourceLED count and type selectable; series / parallel circuits; pseudo-global-shutter LED strobe mode suppresses motion blur

4. Hardware Integration Capabilities

Image output: 1-Lane MIPI / LVDS output, can be matched with a UVC image-processing decoder board for rapid setup of a complete endoscopic imaging system.

Long-line optimisation: MIPI impedance matching tuning for long cables reduces transmission noise and ensures stable image output.

Control interface: SCCB interface reads/writes registers for exposure, gain and mode-switch tuning; supports FSIN frame synchronisation for multi-sensor synchronous capture.

5. Core Product Functions

Multi-mode readout output: supports 800×800 full-frame output, 2×2 analogue Binning pixel binning and window-cropped ROI output; cropped mode increases frame rate and reduces motion blur to meet complete-device bandwidth requirements.

Built-in image preprocessing: DPC dynamic defective-pixel correction, automatic black-level (ABLC) correction and manual multi-channel white-balance gain adjustment; supports horizontal / vertical image mirroring for endoscope assembly and installation.

Flexible exposure and gain configuration: exposure time, analogue gain and digital gain can be configured independently; supports Grouphold group registers for batch parameter updates during vertical blanking, taking effect the next frame with no tearing, suited to AE and AGC algorithm development.

Light-source synchronisation control: built-in Strobe flash pulse output can synchronise an external LED light source for stroboscopic illumination that suppresses motion blur, suited to intracavity LED illumination scenarios.

Multi-level power management: software standby (register-controlled, SCCB communication retained) and hardware standby (XSHUTDN pin controlled, minimum power 2 μA), suited to battery-powered portable devices.

Stable long-distance imaging: supports 10 cm–4 m cables with impedance matching tuning for stable MIPI/LVDS long-line output; supports FSIN frame-sync input for multi-sensor synchronous capture.

 

※ Typical Applications

UVC endoscope solution

Important: the manufacturer has not performed fail-safe validation for the OCHSA10RAQA in Class III life-critical medical devices. If used in human clinical equipment, the customer must complete the complete device's performance, safety and registration certification; we provide only the imaging camera module hardware.

✅ Medical field

1. Human clinical endoscopes (especially suited to ultra-thin disposable endoscopes)

Compatible devices: bronchoscopes, uroscopes (cystoscopes, ureteroscopes, nephroscopes), ENT endoscopes (otoscopes, rhinoscopes, laryngoscopes), choledochoscopes, hysteroscopes, dental scopes and other ultra-thin-diameter endoscopes. Applicable departments: respiratory medicine, urology, ENT, stomatology and gynaecology. Product-form fit: focused on disposable and semi-reusable endoscope solutions; compatible with rigid, flexible and spring-tube endoscope structures; the 2.2–2.5 mm ultra-thin probe outer diameter is suitable for access and inspection in narrow cavities.

2. Veterinary medical endoscopes

For small-animal clinics and livestock veterinary equipment; used for animal ear canals, respiratory tracts, urinary cavities and oral inspection; suited to veterinary ultra-thin bronchoscope and uroscope imaging modules, ideal for disposable veterinary endoscopic products.

✅ Industrial inspection field

Internal inspection of tiny tubes, cavity inspection of precision parts, defect detection in micro-gaps; observation of micro-pipe and miniature-mould cavities; micro-component defect detection; special portable ultra-thin inspection equipment.

✅ Product-form adaptation

This OCHSA10RAQA long-line endoscope camera module has a probe outer diameter that can be packaged to 2.2–2.5 mm, a cable length customisable from 10 cm to 4 m, and can be matched with a UVC image-processing decoder board.

Rigid-tube option: stainless steel / copper tube rigid probe, suited to rigid-access scenarios such as ENT and oral.

Flexible / spring-tube option: spring-sheathed long-line structure, suited to bronchoscopy, uroscopy and other scenarios requiring flexible access into narrow cavities, especially disposable flexible endoscopes.

✅ Product overview

The OCHSA10RAQA long-line endoscope camera module is developed on a 640 k-pixel CameraCubeChip® ultra-compact imaging chip. The probe achieves a 2.2–2.5 mm ultra-thin outer diameter and supports up to 4 m MIPI/LVDS long-line transmission; the chip integrates complete image preprocessing with Binning, window cropping and light-source stroboscopic synchronisation. It fully covers three major directions — disposable human clinical endoscopy, veterinary endoscopy and precision inspection of tiny industrial cavities — and supports rigid, flexible and spring-tube endoscope forms, fitting bronchoscopes, uroscopes, otoscopes, dental scopes and other ultra-thin endoscopic devices.

✅ Customisation and integration

The OCHSA10RAQA imaging sensor is purchased externally; module cable processing, probe assembly and the full test suite are all completed in-house. Customers may provide requirement parameters including probe outer diameter, total cable length, metal tube material and length, lens FOV, LED configuration and interface board requirements; we can provide solution evaluation, sample prototyping through to mass production supply.

 

Service Advantages

  • Full-chain technical service capability covering image processing, hardware and application layers, with SDK and API protocols;
  • Fine medical-grade and industrial-grade image tuning services, plus function and PCBA customization;
  • Fast response: technical support and sales centers in East China (Suzhou) and South China (Shenzhen), serving the Yangtze River Delta and Pearl River Delta nearby;

Over 20 years of image-processing experience and more than 10 years as a core supplier of endoscope image-processing decoder boards, with technical-support experience serving 100+ endoscope companies;

  1. Full-chain technical service

    Covering endoscope image processing from hardware to the application layer;

  2. Cross-platform coverage

    Full-chain customization from decoder board to mainboard to APP, covering Windows, Android, Linux and iOS as well as ARM and x86 platforms;

Leave a Message
Contact us:
Email: Sales@hairayvision.com